Mount the tail light here using the included M4 screws

with cable ties or tape

to protect them and prevent them from coming into contact with sharp edges

the connection will also be disconnected at this point

Connect the Power Up module to the LED lights and secure it at a suitable location inside the body

Triple Spike DBXL 2.0 / DBXL-E 2.0 Mount the tail light hereExtremely bright rear LED, which is easily attached to the rear spoiler bracket. To install, simply clamp the light and connect it to the existing front LED connector. The installation is very straightforward and can be done without much effort. Installation Instructions Loosen the four screws on the spoiler bracket. Clamp the LED between the struts of the spoiler bracket and lightly tighten the screws again. Ensure that the LED is securely in place